Headphones

From Audeze 
The beautifully handcrafted LCD-2, the planar magnetic headphone that put Audeze on the high-end map, delivers audiophile quality, low-distortion sound that articulates the power and nuance of your favorite music. The LCD-2 is the most forgiving of poor recordings in the LCD Collection with a beautiful, musically rich presentation that communicates the warmth, power and glory of music.

Acoustically engineered for beautiful sound
Audeze’s innovative planar magnetic technology delivers an astonishingly lifelike sound. We use space-age materials in a near weightless diaphragm that’s four times larger than typical headphones for fast response times, dramatically reduced distortion, higher resolution and improved imaging. Double-sided magnet arrays delivers a uniform driving force across the entire diaphragm for near zero distortion. Patented Fazor™ Elements guide internal headphone soundwaves to avoid resonance producing a more accurate waveform.

Engineered and Handcrafted in the USA
The LCD-2 is thoroughly engineered for long-term comfort and beautiful sound. We closely match our planar transducers, and match our beautiful factory-made wood rings by grain and color. We also match the earpads by leather texture and color. Lambskin leather headbands and earcups that are filled with foam carefully selected for best sound and contribute to the level of comfort during long listening sessions. Pair the LCD-2 with a quality headphone amplifier or integrated amp for best sound.

Industrial design by Audeze
You’ll be proud of how the LCD-2 sounds and it’s also imbued with sophisticated looks and beautiful hand-made rings. The quality of the entire structure guarantees years of trouble-free listening. Our cutting-edge designs and circuit technologies have created an astonishingly beautiful sounding headphone.

Style	Over-ear, open-back
Transducer type	Planar magnetic
Magnetic structure	Proprietary magnet array
Phase management	FAZOR
Magnet type	Neodymium N50
Diaphragm type	Ultra-thin
Transducer size	106 mm
Maximum power handling	5W RMS
Maximum SPL	>130dB
Frequency response	10Hz – 50kHz
THD	<0.1% @ 100dB
Impedance	70 ohms
Sensitivity	101dB/1mw (at Drum Reference Point)
Minimum power requirement	>100mW
Recommended power level	>250mW

 

• 1.9m 1/4in to dual 4-pin mini-XLR cable
• Professional travel case

 

From Audeze 
The LCD-3 is a time machine that puts you in the room with your favorite artists and musicians. It’s luxuriously spacious, with powerful bass, a rich and engaging midrange, and a top-end that draws you into the music. Its rich, vibrant sound has scale and authority derived from a deep, ambient soundstage with exciting detail and dynamics. The LCD-3 is said to be the best in the world and its natural timbre, especially through the midrange, has been described as a thing of beauty.

Designed, Engineered and Handcrafted in the USA
The LCD-3 is thoroughly engineered for long-term comfort and spacious, realistic sound. We closely match our planar transducers, and match our beautiful factory-made wood rings by grain and color. We use tropical West African Zebrano hardwood -- known as Zebra wood -- not listed in the CITES Appendices. We also match the earpads by leather texture and color. The new LCD steel & leather suspension headband provides comfort for hours of listening pleasure. Choose between genuine leather or leather-free earpads that are filled with carefully selected acoustical foam for best fit and sound. Pair the LCD-3 with a quality headphone amplifier or integrated amp for best sound.

You’ll be proud of how the LCD-3 looks and sounds. It’s imbued with sophisticated looks and beautiful hand-made rings. The quality of the entire structure guarantees years of trouble-free listening. Our cutting-edge designs and circuit technologies have created an astonishingly beautiful sounding headphone.

Style	Over-ear, open-back
Transducer type	Planar magnetic
Magnetic structure	Proprietary magnet array
Phase management	FAZOR
Magnet type	Neodymium N50
Diaphragm type	Ultra-thin
Transducer size	106 mm
Maximum power handling	5W RMS
Maximum SPL	>130dB
Frequency response	10Hz – 50kHz
THD	<0.1% @ 100dB
Impedance	110 ohms
Sensitivity	102dB/1mw (at Drum Reference Point)
Minimum power requirement	>100mW
Recommended power level	>250mW

• 1.9m 1/4in to dual 4-pin mini-XLR cable
• Professional travel case

 

Our Take
"Daddy, why are there tears in your eyes? Is that a spaceship on your head?"
"brb son, my soul is currently being transported to the ninth realm via auditory bliss."

From Audeze 
The LCD-4z is by far Audeze’s most advanced headphone featuring innovative planar magnetic technology that delivers startling dynamics and incredibly open and spacious sound. It features our most advanced diaphragm design; our exclusive nano-scale film actually weighs less than the air it displaces! Benefits include much faster response times for better imaging, and the flattest, deepest, most accurate bass response of any headphone available.

Featuring a new look and greater efficiency, the design and sound of the LCD-4z is sure to thrill! Engineered with a new magnesium housing to produce a light-weight, visually appealing headphone, the LCD-4z maintains the sound signature of LCD-4. We have taken the award-winning design of our top-of-the-line LCD-4 and engineered it with a special 15 ohm voice-coil making it significantly easier to drive than the original LCD-4. The LCD-4z features a dark sleek aesthetic with gold accents. The magnesium rings of the LCD-4z are designed to be strong, lightweight, and non-resonant for a very clean output.

Near weightless nano-scale diaphragm
The LCD-4z features our most advanced diaphragm design; our exclusive nano-scale film actually weighs less than the air it displaces! Benefits include faster response for better transient/impulse response, imaging, and the flattest, deepest, most accurate bass response of any headphone available.

Audeze nearly doubles the magnetic force
Double Fluxor™ Magnet Arrays bring the magnetic flux to 1.5 Tesla, nearly doubling the power driving the diaphragm for improved transient response and far greater resolution.

Precise Imaging
Patented Fazor Element waveguide reduces diffraction of soundwaves resulting in improved treble response, transparency and imaging.

Near zero distortion
Combining our Fluxor™ magnet arrays, nano-scale diaphragm, Fazors, Uniforce voice coil, and other features, the LCD-4 and LCD-4z give you even lower distortion and greater accuracy - usually 1/10th the distortion of conventional headphones. 

Designed, engineered, and handcrafted in our California factory
The LCD-4z headphone is thoroughly engineered and meticulously hand-built using the finest materials combined with cutting-edge planar magnetic technology. We closely match transducers to within +/- 1 dB. The quality of the entire structure guarantees years of trouble-free listening. Our cutting-edge designs and circuit technologies have created a breathtakingly beautiful sounding headphone.

Style	Over-ear, open-back
Transducer type	Planar magnetic
Magnetic structure	Proprietary magnet array
Phase management	FAZOR
Magnet type	Neodymium N50
Diaphragm type	Nano-scale Uniforce™
Transducer size	106 mm
Maximum power handling	5W RMS
Maximum SPL	>130dB
Frequency response	5Hz – 20kHz
THD	<0.1% @ 100dB
Impedance	15 ohms
Sensitivity	98 dB/1mW (at Drum Reference Point)
Minimum power requirement	>100mW
Recommended power level	>250mW

 

• 1/4in to dual 4-pin mini-XLR Premium LCD Headphone Cable
• Professional travel case

From Audeze 
The LCD-X is incredibly dynamic, nimble, neutral and transparent, accurately revealing everything on the recording. It quickly became the ultimate tool for recording engineers, musicians and audiophiles alike for its clean, accurate sound. The sense of space is enormous, the midrange and high frequencies offer fantastic detail so you can hear further into the recording with more air and separation between performers.

Designed, Engineered and Handcrafted in the USA
The LCD-X headphone is thoroughly engineered and meticulously hand-crafted using the finest, most luxurious materials combined with Audeze’s cutting-edge planar magnetic technology. The new LCD steel & leather suspension headband provides comfort for hours of listening pleasure. Choose between genuine leather or leather-free earpads that are filled with carefully selected acoustical foam for best fit and sound. The LCD-X will play on portable devices but sounds best driven by a quality amplifier for best results.

You’ll be proud of how the LCD-X looks and sounds. It’s imbued with sophisticated looks and beautiful hand-made rings. The quality of the entire structure guarantees years of trouble-free listening. Our cutting-edge designs and circuit technologies have created an astonishingly beautiful sounding headphone.

Style	Over-ear, open-back
Transducer type	Planar magnetic
Magnetic structure	Proprietary magnet array
Phase management	FAZOR
Magnet type	Neodymium N50
Diaphragm type	Ultra-thin
Transducer size	106 mm
Maximum power handling	5W RMS
Maximum SPL	>130dB
Frequency response	10Hz – 50kHz
THD	<0.1% @ 100dB
Impedance	20 ohms
Sensitivity	103dB/1mw (at Drum Reference Point)
Minimum power requirement	>100mW
Recommended power level	>250mW

 

• 1.9m 1/4in to dual 4-pin mini-XLR cable

From Audeze 
The LCD-XC Closed-Back Headphone is incredibly dynamic, nimble, neutral and transparent, accurately revealing everything on the recording. It quickly became the ultimate tool for recording engineers, musicians and audiophiles alike for its clean, accurate sound. The closed-back design offers all the benefits of a planar magnetic headphone with increased isolation and greatly reduced ambient noise for a private and powerful listening experience. Your favorite music erupts from a silent background taking on a life of its own. The sense of space is enormous, the midrange and high frequencies offer fantastic detail so you can hear further into the recording with more air and separation between performers.

Designed, Engineered and Handcrafted in the USA
The LCD-XC headphone is thoroughly engineered and meticulously hand-built using the finest, most luxurious materials combined with cutting-edge planar magnetic technology. We closely match the transducers within +/- 1dB (just like the other LCD series models), then match the gorgeous African Bubinga wood earcups. The new LCD steel & leather suspension headband provides comfort for hours of listening pleasure. Choose between genuine leather or leather-free earpads that are filled with carefully selected acoustical foam for best fit and sound. You can pair the LCD-XC with portable devices, but it sounds best driven by a quality amplifier.

You’ll be proud of how the LCD-XC looks and sounds; it’s imbued with sophisticated looks and beautiful earcups that are manufactured at our facility. The quality of the entire structure guarantees years of trouble-free listening. Our cutting-edge designs and circuit technologies have created a breathtakingly beautiful sounding headphone.

Style	Over-ear, closed-back
Transducer type	Planar magnetic
Magnetic structure	Proprietary magnet array
Phase management	FAZOR
Magnet type	Neodymium N50
Diaphragm type	Ultra-thin
Transducer size	106 mm
Maximum power handling	5W RMS
Maximum SPL	>130dB
Frequency response	10Hz – 50kHz
THD	<0.1% @ 100dB
Impedance	20 ohms
Sensitivity	100dB/1mw (at Drum Reference Point)
Minimum power requirement	>100mW
Recommended power level	>250mW

 

• 1.9m 1/4in to dual 4-pin mini-XLR cable

From Audio-Technica 
The result of Japanese craftsmanship and expert engineering, the ATH-ADX5000 Hi-Res Audio headphones set a new standard in open-back headphone performance. The headphones utilize newly developed Core Mount Technology that optimally positions the driver unit within the housing to improve airflow efficiency. The efficient airflow helps the headphones reproduce highly transparent mid and high frequencies and rich, precise bass sound. The 58 mm integrated driver units combine a tungsten-coated diaphragm, baffle and Permendur magnetic circuit in a single unit to reduce unwanted vibration and, since no screw clamps are required, decrease the weight. The baffle is made of a highly-rigid polyphenylene sulfide (PPS)/glass fiber composite to provide stable diaphragm movement.

The housings of the ATH-ADX5000 have a honeycomb-punched design that keeps the housing face open to ventilation, while closing off the sides. This design delivers an accurate, natural sound, but prevents air pressure loss that can negatively affect sound quality. The frame is constructed of strong, lightweight magnesium; the earpads and headband are fashioned from Alcantara, a material known for its extreme durability and comfort.

The ATH-ADX5000 headphones come with a detachable 3.0 m (9.8') cable with A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 6.3 mm (1/4") gold-plated stereo plug for connecting to devices. Each pair of headphones is individually identified by a laser etched serial number and comes with a specially designed hard carrying case.

Features

• 58 mm integrated driver units utilize a Permendur magnetic circuit with exceptional magnetic characteristics
• Japanese craftsmanship: Each housing is carefully hand assembled in Tokyo
• Tungsten-coated diaphragm provides high rigidity for an improved transient response
• Integrated driver unit design combines diaphragm, voice coil, baffle and magnet in single unit to reduce unwanted vibration
• Each pair of headphones is individually identified by a laser etched serial number and comes with a specially designed hard carrying case
• Newly developed Core Mount Technology places driver unit in optimal position for improved airflow and excellent full-range audio reproduction
• Magnesium frame results in rigid, thin, lightweight construction
• New honeycomb-punched housing design blocks side ventilation to prevent undesirable air pressure loss
• Luxurious Alcantara material used on earpads and headband, providing amazing comfort and durability

Type	Open-back dynamic
Driver Diameter	58 mm
Frequency Response	5 – 50,000 Hz
Maximum Input Power	1,000 mw
Sensitivity	100 dB/mW
Impedance	420 ohms
Weight	270 g
Cable	Detachable 3.0 m (9.8') cable with A2DC connectors
Connector	6.3 mm (1/4") gold-plated stereo plug

• Detachable 3.0 m (9.8') cable with A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and 6.3 mm (1/4") gold-plated stereo plug
• Hard carrying case

 

From Audio-Technica 
The ATH-AP2000Ti over-ear headphones feature proprietary large-aperture 53 mm drivers, a permendur magnetic circuit, and diaphragms with a diamond-like carbon (DLC) coating, enabling them to deliver exquisite, full-range audio, including the capacity to reproduce Hi-Res Audio. The headphones also utilize Core Mount Technology that optimally positions the driver unit within the housing to improve airflow efficiency. The efficient airflow helps the headphones reproduce highly transparent mid and high frequencies and rich, precise bass sound.

The rigid, pure-titanium housings reduce unwanted resonance and incorporate Audio-Technica’s Double Air Damping System (D.A.D.S) for deep bass reproduction. Each housing is equipped with an A2DC (Audio Designed Detachable Coaxial) jack to accommodate the three detachable cables included with the headphones: 1.2 m (3.9') and 3.0 m (9.8') cables with a 3.5 mm 3-pole stereo mini-plug, and a 1.2 m (3.9') cable with a 4.4 mm a 5-pole balanced mini-plug.

The ATH-AP2000Ti headphones have soft, durable leather earpads for superior comfort, and they fold flat for easy transport inside the included carrying case. Each pair of these exclusive headphones is individually identified by a laser-etched serial number.

Features

• Large-aperture 53 mm drivers with a permendur magnetic circuit are capable of Hi-Res Audio reproduction
• Core Mount Technology places driver unit in optimal position for improved airflow and excellent full-range audio reproduction
• Audio-Technica’s Double Air Damping System (D.A.D.S.) for deep, natural-sounding bass reproduction
• Diamond-like carbon (DLC) coating on diaphragms helps to deliver exceptional full-range audio
• Rigid, pure-titanium housings reduce unwanted resonance
• Headphones fold flat for easy transport in the included carrying case
• Soft, durable leather earpads for superior comfort
• Each pair of headphones is individually identified by a laser-etched serial number

• Three detachable cables with A2DC (Audio Designed Detachable Coaxial) connectors at the headphones: 1.2 m and 3.0 m cables with 3.5 mm 3-pole stereo mini-plug; 1.2 m cable with 4.4 mm 5-pole balanced mini-plug
• 6.3 mm (¼") stereo adapter
• Cleaning cloth

From Audio-Technica 
The latest addition to the critically acclaimed M-Series line, the ATH-M70x professional studio monitor headphones feature proprietary 45 mm large-aperture drivers and are tuned to accurately reproduce extreme low and high frequencies (5 to 40,000 Hz) while maintaining perfect balance. They are ideal for studio mixing and tracking, FOH, DJing, mastering, post-production, audio forensics and personal listening. Crafted for lasting durability, the studio headphones provide excellent sound isolation and are equipped with 90° swiveling earcups for easy, one-ear monitoring.

Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Features

• M-Series flagship model, tuned for extremely accurate reproduction and carefully crafted using key metal components for lasting durability
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Extended response accurately reproduces extreme low and high frequencies while maintaining perfect balance
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpads and headband provide excellent durability and comfort, and detach for easy replacement
• Perfect for studio mixing and tracking, mastering and audio forensics
• Fold-flat design for space-saving portability
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)

Type	Closed-back dynamic
Driver Diameter	45 mm
Magnet	Neodymium
Voice Coil	CCAW (Copper-clad aluminum wire)
Frequency Response	5 - 40,000 Hz
Maximum Input Power	2,000 mW at 1 kHz
Sensitivity	97 dB
Impedance	35 ohms
Weight	280 g (9.9 oz), without cable and connector
Cable	Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
Accessories Included	Carrying case, 6.3 mm (1/4") screw-on adapter

 

• Audio-Technica ATH-M70x Pro Monitor Headphones
• Detachable 3.9 to 9.8' (1.2 to 3.0 m) Coiled Cable
• Detachable 9.8' (3.0 m) Straight Cable
• Detachable 3.9' (1.2 m) Straight Cable
• Carrying Case
• 1/4" (6.3 mm) Screw-On Adapter

From Audio-Technica 
The ATH-R70x is Audio-Technica’s first pair of open-back reference professional headphones. Together with the ATH-M70x, they stand as a flagship model in A-T’s lineup of professional studio headphones. Featuring specially designed drivers and acoustically transparent housings fashioned from aluminum honeycomb mesh, these headphones provide an accurate and natural open-back sound. They also incorporate a new, improved design of our popular 3D wing support system to provide even greater comfort during the prolonged use often required in professional settings. Robust yet lightweight, and equipped with a unique, dual-sided detachable cable that automatically maintains proper stereo orientation (no matter how it’s attached), the R70x headphones are built for lasting comfort, convenience and audio purity.


Features

• High-efficiency magnets and pure alloy magnetic circuit design reduce distortion and ensure accurate and extended high-frequency response
• Carbon composite resin improves structural rigidity to provide detailed transient response
• Acoustically transparent, aluminum honeycomb-mesh housings provide a natural and spacious open-back sound
• Breathable fabric earpads and improved wing support provide long-wearing comfort
• Feather-light weight (approx. 210 g w/o cable) and robust construction make headphones perfectly suited for professional use
• Unique, dual-sided detachable locking cable is L/R signal independent, always ensuring proper stereo orientation

Type	Open-back reference
Driver Diameter	45 mm
Frequency Response	5 - 40,000 Hz
Maximum Input Power	1,000 mW at 1 kHz
Sensitivity	99 dB
Impedance	470 ohms
Weight	210 g (7.4 oz), without cable and connector

 

• Protective carrying pouch

Our Take  
Man alive, we love the Andromeda. Like, really love it. In an increasingly crowded market with new IEMs popping up seemingly every week, Andromeda consistently rises to the top of every discussion. One listen and it makes sense. Very few earphones manage to be both revealing and "high resolution" while also delivering a sweet, musical, and beautiful sound. Non-fatiguing and pleasurable across every genre of music we could throw at it, this thing never ceases to amaze. Our highest recommendation.

From Campfire 
Andromeda combines all of the best elements of our earphone design experience into a single set of earphones. The result is a remarkable and unique sounding earphone with superior top-to-bottom coherence. This 2019 refresh raises the bar on this audiophile classic. A refined body, new cable and new case elevate the Andromeda to new heights of excellence.

Andromeda exudes confidence in its handling of musical detail. It has high frequency extension that makes cymbals sparkle and expand past your listening horizon. Mids are fully resolved and uncolored. And the bass is extended and balanced; rich in texture and well defined.

2019 Revision: New Case + New Cable
Building from our Silver Plated Copper Litz wire conductors and our popular tangle-resistant twisted cable weave, we’ve added a new stylish Smoky jacket to compliment the unique finish of our new line of earphones. A new light-weight molded ear-hook design replaces the memory wire. The result is a light weight cable that is a pleasure to use everyday.

Our exciting new premium ‘Green’ leather protective zipper case is an update to our standard leather earphone case. Luxurious leather surrounds a substantial and protective rubber barrier that ensures that your earphones will remain safe while in transit. The interior is a dense faux wool lining that preserves the anodized finish of your earphones. Each case is made in Portugal by a small team of skilled crafts people that share our commitment to quality.

Highlights

• Small Batch Production. Careful selection of each element of our earphones is just the start of the meticulous assembly of your earphone. Our close attention at every stage from design to production ensures your earphones will be a worthwhile and lasting product.
• Custom Enhanced MMCX. Our custom Beryllium Copper MMCX eliminates the traditional shortcomings of the connection and harnesses all of its benefits. Beryllium Copper provides a robust mating mechanism; one that is typically made from soft brass. This selection of a harder material extends the life of component and the earphone.
• Individually Inspected. Close attention to detail is critical to delivering you the superior musical experience from our earphones. We test and pair each individual earphone, Left and Right, to establish its conformity to our firmly established tuning and performance criteria. The result is a pair of earphones made for each other that you can feel good about.

• Dual High Frequency Balanced Armature Drivers + T.A.E.C.
• Single Mid Frequency Balanced Armature Driver
• Dual Low Frequency Balanced Armature Drivers
• Tuned Acoustic Expansion Chamber™ (T.A.E.C.)
• Beryllium / Copper MMCX Connections
• Machined Aluminum Shell
• Stainless Steel Spout
• 10Hz–28 kHz Frequency Response
• 112.8 dB SPL/mW Sensitivity
• 12.8 Ohms @ 1kHz Impedance

 

• Campfire Audio Andromeda earphones
• Premium Campfire Audio Leather Earphone Case. Made in Portugal.
• Campfire Audio Smoky Jacket Litz Cable – Silver Plated Copper Conductors with Beryllium Copper MMCX and 3.5mm Stereo Plug.
• Final Audio Tips (xs/s/m/l/xl)
• Campfire Audio Marshmallow Tips (s/m/l)
• Silicon Earphone Tips (s/m/l)
• Campfire Audio Lapel Pin
• Cleaning Tool

Our Take  
Let us just come right out and say it: if you love bass, you will fall head over heels in love with Atlas. These things are CANONS, yet also completely natural and coherent. While maybe not as perfectly well-rounded as the Andromeda or as dazzling as the Solaris, we think the Atlas is a top pick for both bass-lovers and those looking for the fullest sound IEMs are capable of offering.

 

From Campfire 
A truly massive sound. We’ve expanded our ADLC driver to a mighty 10mm and enclosed it in Stainless Steel – Atlas is a full range powerhouse. The result is a terrific sounding earphone with a dynamic signature that will convert even the most jaded listener to an Atlas fan.

Our new stainless steel earphone bodies are drop forged and then CNC machined before being hand polished to a mirror finish. The weight of our stainless steel earphones in your hand feels good. The durability of stainless steel gives you peace of mind in daily use, knowing these are going to last.

Expanding on the commercial and critical success of Vega, we returned to an A.D.L.C. diaphragm design for Atlas and super sized it to a new 10mm driver; up from 8.5mm utilized in Vega. For a quick background, A.D.L.C. (Amorphous Diamond-Like Carbon) is the hybrid of diamond and graphite carbon. It is a non-crystalline diamond. It is a material that has low density and high rigidity, important factors when considering diaphragm materials.

In designing a dynamic driver, the diaphragm material used should be as rigid as possible to provide a wider range of frequency responses and lower distortion. Additionally, the density of the diaphragm material should also be as low as possible in order to increase fidelity. The 10mm A.D.L.C. diaphragm driver at the heart of Atlas achieves these goals; superior fidelity, excellent frequency response, and low distortion.

Tuning a high fidelity earphone is both an art and a science. To make something really special many critical factors need to intersect perfectly. This is why we choose to design and iterate with 3D modeled parts and take those parts into our final builds. It gives us an unprecedented level of control to capture the sound we’re trying to achieve. We think you’ll appreciate this refinement when you hear them yourself.

We’ve created an all new pure silver cable for Atlas that allows you to get the very best sound possible from your earphone, right out of the box. The pure silver conductors provide additional resolution and refinement to an already exceptional sound. This cable is also wound with a twist that reduces tangling and microphonics improving your daily experience with Atlas.

Highlights

• Stainless Steel Body – Our new stainless steel earphone bodies are drop forged and then CNC machined before being hand polished to a mirror finish.
• MMCX Designed to Last. Our custom Beryllium Copper MMCX eliminates the traditional shortcomings of the connection and harnesses all of its benefits. Beryllium Copper provides a robust mating mechanism; one that is typcially made from soft brass. This selection of a harder material extends the life of component and the earphone.
• Individually Crafted. Close attention to detail is critical to delivering you the superior musical experience from our earphones. We test and pair each individual earphone, Left and Right, to establish its conformity to our firmly established tuning and performance criteria. The result is a pair of earphones truly made for each other.

• 5Hz–20 kHz Frequency Response
• 105 dB SPL/mW Sensitivity
• 19 Ohms @ 1kHz Impedance
• Less than 1% Total Harmonic Distortion
• Single Full Range 10mm Dynamic Driver
• Plasma enhanced Chemical Vapor Depostion (C.V.D.) Amorphous Diamond Like Carbon (A.D.L.C.) Diaphragm.
• Beryllium / Copper MMCX Connections
• Stainless Steel Body

• Campfire Audio Solaris In-Ear Monitor headphones
• Campfire Audio Black Leather Earphone Case
• Campfire Audio Super Litz Cable (3.5 mm Termination)
• Final Audio E-Type Tips (xs/s/m/l/xl)
• Campfire Audio Marshmallow Earphone Tips (s/m/l)
• Silicon Earphone Tips (s/m/l)
• Campfire Audio Lapel Pin
• Cleaning Tool
• Earphone Protection Sleeve

From Campfire 
IO (Eye-Oh) presents an all new fun and engaging listening experience. IO’s sound is fast and resolving. It’s refined mid range complements extended high frequencies and articulate bass. The result is fidelity unmatched by any other in-ear monitor in its class. Many more iterations and unique prototypes were made of IO than any other earphone in Campfire Audio’s line up to date. It was a journey to fine tune the sound and get it right. The result is an earphone that we can proudly stand next our best-known models. We feel confident you will enjoy the result of this effort.

Based on our classic Campfire Audio profile, Io features a ‘Garnet’ Red Anodized Finish with 24K Gold Plated Screws. Stainless Steel Spout and Machined Aluminum Body are paired with a custom beryllium / copper insulated round MMCX connector. Each earphone is assembled by hand in our workshop in Portland, Oregon by our team of highly skilled craftspeople.

Driver count has never been as especially important to our designs as the proper selection and implementation of particular drivers. When using more than a single driver, it is as much about the synergy between drivers as it is about any one particular driver. Staying true to the Campfire Audio design philosophy “Less is More” and using fewer, higher quality components is ideal to achieve a more a musical presentation. Using an oversized woofer BA as a foundation and then pairing that with a small tweeter, IO came together. Our Tuned Acoustic Expansion Chamber (T.A.E.C.™) provides that natural and open top-end extension people have come to expect from Campfire Audio earphones.

Building from our Silver Plated Copper Litz wire conductors and our popular tangle-resistant twisted cable weave, we’ve added a new stylish Smoky jacket to compliment the unique finish of our new line of earphones. A new light-weight molded ear-hook design replaces the memory wire. The result is a light weight cable that is a pleasure to use everyday.

Our exciting new premium ‘Bordeaux’ leather protective zipper case is an update to our standard leather earphone case. Luxurious leather surrounds a substantial and protective rubber barrier that ensures that your earphones will remain safe while in transit. The interior is a dense faux wool lining that preserves the anodized finish of your earphones. Each case is made in Portugal by a small team of skilled crafts people that share our commitment to quality.

Highlights

• Designed and Assembled in Portland, Oregon USA. Each unit is assembled by hand in our workshop by our small team of highly skilled craftspeople. From driver to body each component part is carefully examined and tested. After each unit is built, it is placed into a pairing pool, where it finds its ideal sonic match.
• Premium Custom Connectors. Our custom Beryllium Copper MMCX eliminates the traditional shortcomings of the connection and harnesses all of its benefits. Beryllium Copper provides a robust mating mechanism; one that is typcially made from soft brass. This selection of a harder material extends the life of the component and the earphone.
• 2 year Warranty. Each unit we make is backed by our 2-Year Limited Product Warranty. Rest assured when you purchased a Campfire Audio earphone, it will be a great ownership experience.

• Dual Balanced Armature Driver Design.
• Beryllium / Copper MMCX Connections
• ‘Garnet’ Red Anodized Aluminum Body
• 24k Gold Plated Screws
• Stainless Steel Spout
• 5Hz–22kHz Frequency Response
• 109 dB SPL/mW Sensitivity @ 1k
• 26 Ohms @ 1kHz Impedance

• Campfire Audio IO In-Ear Monitor headphones
• Premium Campfire Audio Leather Earphone Case. Made in Portugal.
• Campfire Audio Smoky Jacket Litz Cable – Silver Plated Copper Conductors with Berylium Copper MMCX and 3.5mm Stereo Plug.
• Final Audio Tips (xs/s/m/l/xl)
• Campfire Audio Marshmallow Tips (s/m/l)
• Silicon Earphone Tips (s/m/l)
• Campfire Audio Lapel Pin
• Cleaning Tool

From Campfire 
This is an all new Polaris. The only thing that remains from the past is hybrid design and the striking blue finish. Spacious highs and mids open up over top of rich and impactful bass. Polaris boasts a bombastic sound ideal for modern music. It delivers a listing experience that is simultaneously warm, natural, and detailed. This combination invites a serious listen. Treat yourself!

Based on our classic Campfire Audio profile, Polaris features a’Cerulean’ Blue Anodized Finish with Black PVD Screws. Black Stainless Steel Spout and Machined Aluminum Body are paired with a custom beryllium / copper insulated round MMCX connector. This is an earphone that is meant to last. Each earphone is assembled by hand in our workshop by our team of highly skilled craftspeople.

Polaris features 2 unique proprietary acoustic technologies; our T.A.E.C.™ and our Polarity Tuned Chamber™. This allows us tune and design for each driver to ensure maximum sonic efficiency while maintaining cohesive presentation. Our Polarity Tuned Chamber™ combines with a 9.2mm dynamic driver and does the heavy lifting while our T.A.E.C.™ paired with a balanced armature to present classic Campfire Audio sparkle.

Building from our Silver Plated Copper Litz wire conductors and our popular tangle-resistant twisted cable weave, we’ve added a new stylish Smoky jacket to compliment the unique finish of our new line of earphones. A new light-weight molded ear-hook design replaces the memory wire. The result is a light weight cable that is a pleasure to use everyday.

Our exciting new premium ‘Blue’ leather protective zipper case is an update to our standard earphone cases we’ve used since our launch. Luxurious textured leather surrounds a substantial and protective rubber barrier that ensures that your earphones will remain safe while in transit. The interior is a dense faux wool lining that preserves the anodized finish of your earphones. Each case is made in Portugal by a small team of skilled crafts people that share our commitment to quality.

Highlights

• Designed and Assembled in Portland, Oregon USA. Each unit is assembled by hand in our workshop by our small team of highly skilled craftspeople. From driver to body each component part is carefully examined and tested. After each unit is built, it is placed into a pairing pool, where it finds its ideal sonic match.
• Premium Custom Connectors. Our custom Beryllium Copper MMCX eliminates the traditional shortcomings of the connection and harnesses all of its benefits. Beryllium Copper provides a robust mating mechanism; one that is typcially made from soft brass. This selection of a harder material extends the life of the component and the earphone.
• 2 year Warranty. Each unit we make is backed by our 2-Year Limited Product Warranty. Rest assured when you purchased a Campfire Audio earphone, it will be a great ownership experience.

• Single Balanced Armature + T.A.E.C.™
• 9.2mm Dynamic Driver + Polarity Tuned Chamber™
• Newly Insulated Custom Beryllium / Copper MMCX Connections
• ‘Cerulean’ Blue Anodized Aluminum Body
• Black PVD Screws
• Black Stainless Steel Spout
• 5Hz–20kHz Frequency Response
• 105 dB SPL/mW Sensitivity @ 1k
• 17 Ohms @ 1kHz Impedance 

• Campfire Audio Polaris In-Ear Monitor headphones
• Premium Campfire Audio Leather Earphone Case. Made in Portugal.
• Campfire Audio Smoky Jacket Litz Cable – Silver Plated Copper Conductors with Berylium Copper MMCX and 3.5mm Stereo Plug.
• Final Audio Tips (xs/s/m/l/xl)
• Campfire Audio Marshmallow Tips (s/m/l)
• Silicon Earphone Tips (s/m/l)
• Campfire Audio Lapel Pin
• Cleaning Tool

Our Take  
Solaris is a true culmination of technological refinement, passion, and art. Ken Ball and his team at Campfire have delivered an IEM so masterfully designed, built, and tuned, that we consider the Solaris to be amongst the top 3 earphones ever made. No hyperbole here, people. The Solaris stuns. We confidently award it our endgame tag and feel lucky to be able to offer it to our customers here at Bloom Audio.

 

From Campfire 
Pushing ourselves to discover what is possible, we explored the outer horizon and found something exceptional; Solaris. Solaris is the summation of our experience creating earphones and the acoustic technologies we’ve developed and discovered along the way. It delivers a sound that is second to none.

Holographic presentation. Intimate detail retrieval. Soaring highs, engaging mids and impactful bass. Music sounds like music with lifelike performances, superior layering and unbelievable imaging. The traditional wall between high end two-channel hi-fi and personal audio just got thinner.

By incorporating our many individual acoustic technologies into Solaris we were able to create an exceptional earphone. Solaris is a hybrid design, blending the best of the balanced armature performance with the physicality of dynamic drivers. It features 2 custom balanced armature drivers paired with our T.A.E.C for extended highs, without sibilance or fatigue. A larger single rear-ported balanced armature driver provides rich delivery of mid frequencies. A specially tuned version of our 10mm A.D.L.C. dynamic driver, optimized with our Polarity Tuned Chamber, anchors the sonic performance with deeply engaging mid-frequency tonality and visceral bass response.

Each pair of Solaris is hand assembled in our Portland, Oregon workshop. Our team of skilled builders pours their time and attention into each earphone they construct. The attention to detailed paid throughout the process ensures your Solaris will be a world-class earphone unlike any other.

Our new Super Litz cable is made from four large conductors of Silver-plated Copper Litz wire. Each conductor is individually comprised of a selected set of particular diameter strands. The Super Litz cable is the perfect balance of physical gauge and performance. The cable is terminated with our custom beryllium/copper MMCX connectors and over-molded 3.5mm plug. This cable brings out the best in Solaris.

Highlights

• Tuned Acoustic Expansion Chamber (T.A.E.C.)™ – our tuned acoustic expansion chamber technology allows us to deliver extended high frequencies without sibilance or fatigue. We optimize our driver performance by adjusting the volume of space available in front of the driver. This is superior to the typical “Tube+Dampener” system because it provides a direct passage from the driver to your ear, which results in unsurpassed clarity and extension.
• Polarity Tuned Chamber. Our Polarity Tuned Chamber allows us to optimize the sonic performance of our dynamic drivers. Deploying particular volume cavities, both in front of and behind our dynamic driver, we can pull bigger sounds from smaller drivers. This also gives us the ability, in the case of hybrid designs, to specifically target the driver performance.
• 3D optimized acoustic construction. Close attention to detail is critical to delivering you the superior musical experience from our earphones. Solaris features an acoustically optimized interior model that allows each driver to deliver the very best sound quality. When heard together, the drivers offer a seamless musical experience as a result of this process.

• 24K Gold Plated Lid
• Durable PVD Finished Body
• Dual Custom Balanced Armature Drivers + T.A.E.C. (High)
• Single Custom Ported Balanced Armature Driver (Mid)
• Specially Tuned 10mm Dynamic Driver (Mid + Low)
• Plasma enhanced Chemical Vapor Depostion (C.V.D.) Amorphous Diamond Like Carbon (A.D.L.C.) Diaphragm.
• Beryllium / Copper MMCX Connections
• Stainless Steel Spout
• 5Hz–20 kHz Frequency Response
• 15 dB SPL/mW Sensitivity
• 10 Ohms @ 1kHz Impedance
• Less than 1% Total Harmonic Distortion 

• Campfire Audio Solaris In-Ear Monitor headphones
• Campfire Audio Premium Leather Earphone Case
• Campfire Audio Super Litz Cable (3.5 mm Termination)
• Final Audio E-Type Tips (xs/s/m/l/xl)
• Campfire Audio Marshmallow Earphone Tips (s/m/l)
• Silicon Earphone Tips (s/m/l)
• Campfire Audio Lapel Pin
• Cleaning Tool
• Earphone Protection Sleeve

From Final 
Extremely small and lightweight, with a perfect fit and high sound insulation properties. Situated close to the wearer's eardrum and being highly airtight, this model delivers high resolution, a vast sound stage and rich bass tones.

Employs a detachable MMCX connector and high purity OFC wire.
Bringing the driver unit closer to the ear drum, achieves an even more realistic, vivid sound quality.

In order to achieve this in the F4100, we have meticulously downsized the housing with a design consisting of the minimum possible elements. Miniaturized to have a diameter of 5.5 mm, the housing is finished with hard aluminium-magnesium alloy anodic film. This also contributes weight reduction. Final's unique method of using full-range balanced armature drivers across all models recreates bass tones with a fullness you would never imagine from the housing size. The cable is high purity OFC with detachable MMCX connectors.

The earphone comes with an ear hook to prevent microphonics from the cable. This is one of final's proud model, realizing sound quality and ease of use in a higher dimension. It tends to have a slightly warmer sound quality than the F7200.

Housing: Black alumite finished aluminum
Driver: Balanced armature
Connector: MMCX
Cable: Black OFC cable
Sensitivity: 106dB
Impedance: 42Ω
Weight: 12g
Cord length: 1.2ｍ

• Detachable OFC cable with MMXC connectors
• Silicon Carry Case
• Final Ear tips (E series, 5 sizes)
• Ear Hook
• Foam ear piece (3 sizes)
• Safe fit ring

 

 

Our Take Looking for the open-back signature Focal sound but aren't ready to spring for Utopia? Clear gets you very close to that pants-shredding level of clarity at a fraction of the investment. We love the Clear and consider it an incredible value at its price.

From Focal

Continuing in the spirit of Utopia and using the best of Focal technologies, Clear offer the sensation of listening to your favourite music in a space that no longer has limits. Discover the emotion of music, thanks to Clear's ability to recreate the tiniest details of the recording.

Clear provide listening worthy of the best speakers. The latest addition to Focal's top-end headphones range, Clear use the new generation of totally open backed full-range speakers, precisely revealing the tiniest details for ultra-realistic listening. With their design surpassing Elear in terms of openness, Clear make you simply forget that you are wearing headphones. The widely held impression that headphones reduce listening space disappears, thanks to Clear's open ear cushions. The technologies chosen and the aluminium/magnesium alloy M-profile dome, preserve breadth and dynamics worthy of the best high-fidelity speakers. These headphones will become essential: they come with a hard transport case and three cables providing the best solution for different types of audio equipment.

Key points:

• Open-back design for use at home
• Exclusive full-range speaker driver with an 'M'-shape Aluminum/Magnesium dome (patent pending)
• Excellent performance when connected to an audiophile portable stereo
• A listening experience very close to that provided by high-fidelity loudspeakers
• Comfortable and ergonomic

Headphone
Driver Size	1.57" / 40 mm
Voice Coil	Copper
Design	Over-Ear (Circumaural)
Earcup Style	Open-Back

General
Frequency Response	5 Hz to 28 kHz
Sensitivity	104 dB at 1 kHz / 1 mW
Impedance	55 Ohms
Total Harmonic Distortion (THD)	0.25%

Connectivity
Audio Connector	1/8" / 3.5 mm TRS Straight 4-Pin XLR 1/4" TRS Straight
Adapter (Included)	1/4" TRS
Connector to Earpiece	2 x 1/8" / 3.5 mm

Cable
Design	U-Type
Color	Black
Detachable	Yes
In-Line Remote/Microphone	No
Cable Length	9.8' / 2.99 m (Balanced) 9.8' / 2.99 m (Unbalanced) 3.94' / 1.2 m (Unbalanced)

Physical
Material of Construction	Aluminum, Fabric, Leather
Weight	0.99 lb / 450 g

 

• Hard, elegant carrying case with storage for one cable
• 3 cables
• 1.2m with 3.5mm stereo jack for connection to audiophile portable devices
• 3m with 6.35mm stereo jack connector
• 3m with XLR 4 pin symmetrical connector

Our Take 
The Elegia is quickly becoming our go-to closed-back headphone for travel and use around our office. While not quite the level of stunning clarity as the Stellia, the Elegia actually represent an incredible performance value for its class. If you're looking for closed-back under a grand, the Elegia should absolutely be on your short list.

From Focal

Elegia is the new, and the first, audiophile circum-aural closed-back headphones. Integrating the best of exclusive technologies from Focal, Elegia guarantees remarkable listening quality, everywhere and anywhere. Every component has undergone cutting edge research and been meticulously considered. The sound reproduction is precise and the power is certainly not lacking.

 

To enjoy an incredible listening experience in total privacy, without worrying about a noisy environment disturbing this moment of pleasure: this is the promise kept by Elegia. These circum-aural closed-back headphones incorporate a new generation of exclusive full-range speaker drivers capable of operating in a small inner environment whilst ensuring exceptional dynamics and the most precise sound reproduction. Whether it’s the motor, the frameless copper voice coil, the dedicated 110 micron surround or the ’M’-shape inverted dome, Elegia's speaker drivers are a mass of innovation dedicated to sound purity. And when connected to portable audio players, these headphones are incredibly high-performing. Zero resonance, excellent soundproofing: the naturalness and realism of the sound is striking from the first few seconds of listening.

Headphone
Driver Size	1.57" / 39.88 mm
Driver Type	Dynamic
Design	Over-Ear (Circumaural)
Earcup Style	Closed-Back

General
Frequency Response	5 Hz to 23 kHz
Sensitivity	105 dB at 1 kHz / 1 mW
Impedance	35 Ohms
Total Harmonic Distortion (THD)	0.1%

Connectivity
Audio Connector	1/8" / 3.5 mm TRS Straight
Adapter (Included)	1/4" TRS
Connector to Earpiece	2 x 1/8" / 3.5 mm

Cable
Design	Y-Type
Color	Black, Silver
Detachable	Yes
In-Line Remote/Microphone	No
Cable Length	3.94' / 1.20 m (Flat)

Physical
Material of Construction	Aluminum, Fabric, Leather
Weight	0.95 lb / 430 g

• Thermoformed, rigid carrying case in the shape of the headphones.
• 1 asymmetric cable 1,2m (3.5mm TRS jack)
• 1 stereo jack adapter 3.5mm to 6,35mm

Our Take
Holy smokes. Welcome to closed-back heaven. Supreme sound delivered by Focal's special pure Beryllium dome and built with utmost luxurious comfort, you'll fall in love with Stellia the moment you put it on. We sure did. We give it our unequivocal endgame recommendation.

 
From Focal

This very high-end circum-aural headphones manufactured at Focal is equipped with a new generation of exclusive electrodynamic speaker drivers, capable of working at low acoustic load while offering an extremely extensive frequency response (5Hz – 40kHz). Thanks to the many cutting-edge technology which are integrated in its speaker drivers (the frameless 100% copper voice coil, ‘M’-shaped pure Beryllium dome), Stellia delivers a perfect sound, whether bass articulation or the highest frequency details. In addition, Stellia’s offers extremely low impedance at 35 Ω, making the headphones very easy to drive through the output of a mobile audio source: experience the purity of sound, everywhere.

Each component has been developed with optimal acoustics in mind, without compromising on style. Because at Focal, innovation goes beyond technology; it influences product use and aesthetics. So, the two cognac and mocha finishes and the full-grain leather chosen sublimate this unique object.

 

Key points:

• Reference closed-back headphones for home and on-the-go use
• Exclusive full-range speaker drivers with an ‘M’ shape pure Beryllium dome (patent pending)
• Uncompromising tonal balance, reproduction of the tiniest sound details at both very high and very low frequencies
• Incredible dynamics within a pair of closed-back headphones
• Excellent performance when connected to a portable audiophile player
• Very good ambient noise soundproofing
• Comfortable and ergonomic
• High-quality materials

• Type: Circum-aural closed-back headphones
• Impedance: 35 Ohms
• Sensitivity: 106dB SPL / 1mW @ 1kHz
• THD: 0.1% @ 1kHz / 100 dB SPL
• Frequency response: 5Hz–40kHz
• Loudspeaker: 1.6″ (40mm) pure Beryllium “M” shape dome
• Weight: 0.96lb (435g)

• Case (cognac and mocha faux leather)
• 3m high-quality cable (Ideal for use at home on a high-end amplifier, thanks to its symmetrical 4-pin XLR connector.)
• 1.2m high-quality cable (designed to be portable with a stereo 3.5mm jack)
• Rigid travel case (in cognac and mocha woven finishes)
• 1/8" Jack adapter

Our Take When Focal released the Utopia in 2016, it was quickly lauded by many as the "greatest headphones in the world." Once you listen, it's easy to hear why. The transparency and accuracy is mind-blowing. You will hear detail in music you love that you've never heard before. If you have or are considering a high end headphone DAC/amp, the no-compromises Utopia is amongst the very best open-back headphones you can buy. Endgame, no question.

From Focal

Utopia have already become the world reference high-fidelity headphones manufactured in France by Focal. They are the result of 35 years of innovation, development and manufacturing of high-end speaker drivers and loudspeakers. Equipped with exclusive technology, they offer striking realism, neutrality, dynamics and clarity, for sound with unrivaled purity. Utopia are unique: they are the world’s first audiophile headphones featured totally open-backed full-range speaker drivers with pure Beryllium ’M’-shaped domes. The acoustic quality of this exclusive solution allowed Focal to avoid the use of any crossover or passive filtering process to achieve a frequency response from 5Hz to 50kHz! The equivalent of two tiny authentic loudspeakers over your ears… They meet all the requirements expected of high-end headphones due to their sophisticated and elegant design and to purposeful materiality, such as the carbon fibre yoke and true lambskin leather ear cushions.

The listening experience is outstanding in terms of realism, natural sound reproduction, dynamics and clarity. When listening to them, the headphones virtually disappear and the audio signal is revealed with a level of precision never achieved until Utopia.
Design is also a key point, be it in regards to the way of using the headphones, comfort, as well as the aesthetic. Another achievement with Utopia is the removal from the conventional rotation included on the yoke and its integration into the headband to ensure a total purity of the design. The true lambskin leather, used on the cushions, reinforces the character of classically elegant lines, as well as the expression of comfort and overall performances. These headphones have immediately been applauded by the press as well as music lovers after launching.

Key points:

• Made in France
• Open back circum-aural headphones dedicated to low noise environments
• Reference pair of headphones featuring full range loudspeakers made of a
  pure Beryllium “M” shape dome (patent pending)
• Mechanical design offering a full compatibility to any size and shaped head
• Balanced cable with channel separation for fast and easy custom-made solutions (bi-amp)

Headphone
Driver Size	1.57" / 40 mm
Design	Over-Ear (Circumaural)
Earcup Style	Open-Back

General
Frequency Response	5 Hz to 50 kHz
Sensitivity	104 dB at 1 kHz / 1 mW
Impedance	80 Ohms
Total Harmonic Distortion (THD)	0.2%
Foldable	No

Connectivity
Audio Connector	1/4" TRS Straight
Connector to Earpiece	2 x LEMO (Unspecified Type)

Cable
Design	U-Type
Color	Black
Detachable	Yes
In-Line Remote/Microphone	None
Type	Oxygen-Free Copper
Cable Length	9.8' / 2.99 m

Physical
Material of Construction	Carbon Fiber, Fabric, Leather, Metal
Weight	1.08 lb / 490 g

 

• Rigid carrying case with magnet locking system
• 9.8ft (3m) OFC cable (1 x Neutrik® 01/4“ (6,35mm) stereo Jack Neutrik® 2 x shielded 03⁄8“ (9.5mm) Lemo® connectors with self-locking bayonet system)

Our Take
Ah, the 99 Classics. A taste of luxury in a highly affordable and value-packed package. Whenever our team wants to demo a pair of headphones to someone "not into the hobby," we reach for the 99 Classics. A single song nary finishes without their eyes widening to the realization that high end audio doesn't mean high priced.

 

From Meze Audio
Just like fingerprints, wood grain is as unique, thus making each pair of Meze Headphone a one of a kind. You will love how they feel in your hands. Sturdy built and precise assembly. The ear cups are made with a satin finished wood grain. Put them on, sit back, and enjoy your favorite sound of plucked strings, upbeat grooves or thumping beats while still looking classy

The choice of wood is an inherently difficult one. The rich colors of walnut require the use of air drying, a long and expensive procedure. The process of shaping just a single pair of earcups takes up to 8 hours. The whole process of sanding, lacquering, and finishing lasts 45 days. The wooden components are carefully inspected and no flaws are permitted to reach the final assembly. 

We aimed for perfection in every component we designed. CNC carved wood ear cups, cast zinc alloy hardware with electroplated coating, stamped manganese spring steel headband, memory foam and soft PU leather are the materials your hands and eyes will get to enjoy. No plastic here for you to see.

Besides the usual warranty everybody is offering, we guarantee that the 99s are serviceable if any parts would ever need to be replaced because we built these headphones to last.

• Transducer size: 40mm
• Frequency response: 15Hz – 25KHz
• Sensitivity: 103dB at 1KHz, 1mW
• Impedance: 32 Ohm
• Rated input power: 30mW
• Maximum input power: 50mW
• Detachable Kevlar OFC cable
• Plug: 3.5mm gold plated
• Weight: 260 gr (9.2 ounces) without cables
• Ear-cups: walnut wood

• Meze 99 Classics Headphones
• Hard Eva Carrying Pouch
• 1.2m Thread Kevlar OFC With Mic And Remote Cable
• 3m Thread OFC Cable
• 6.3mm Gold-Plated Jack Adapter
• Airplane Adapter

Our Take
Want that fantastic Meze 99 Classics sound, but not digging the wood cups? These black beauties deliver in spades. These are a legit bargain given the sound quality, our highest recommendation for great performing cans that are absurdly cheap.

 

From Meze Audio
A fresh take on the 99 series for the uptown audiophile, 99 Neo brings together Meze Audio’s signature sound quality with cutting edge style.

Take a moment with 99 Neo. Feast your eyes on coal black textured earcups. Caress the butter soft earpads. Enjoy crisp, clean sound – natural, balanced, undistorted. This is the contemporary hi-fi headphone to fall in love with.

Feel the self-adjusting headband and soft, cushioned earpads cradle your head. The stamped manganese spring steel headband delivers even pressure across your head. The ear pads are crafted of medium density memory foam. So you can get lost in your music for hours. Find your bliss in warm, natural/balanced sound. With hardware of cast zinc alloy with electroplated coating, 99 Neo is a classic for every day. And should you ever need to replace a part, it’s fully serviceable. 99 Neo will stand the test of time, so generations beyond you can fall in love with it too.

• Transducer size: 40mm
• Frequency response: 15Hz - 25KHz
• Sensitivity: 103dB at 1KHz, 1mW
• Impedance: 26 Ohm
• Rated input power: 30mW
• Maximum input power: 50mW
• Detachable Kevlar OFC cable
• Plug: 3.5mm gold plated
• Weight: 260 gr (9.2 ounces) without cables
• Ear-cups: ABS Plastic

• Case: Hard EVA carrying pouch
• Cable: 1.5m thread Kevlar OFC with Mic and remote
• Adapter: 6.3mm gold-plated jack
• Cable pouch

AEON Flow Closed is the closed-backed version of MrSpeakers' ground breaking compact and affordable full sized planar magnetic headphone. 

AEON Flow Closed is all metal construction for durability and highest sound quality, and sports a midnight blue/black metallic paint. AEON Flow Closed utilizes the all the same advanced technologies found in our flagship ETHER Flow headphones, and delivers them in a super comfortable design.

Designed, built and tested in San Diego, CA with a 2 year warranty for parts and labor.

• Efficiency: 92dB/mW 
• Weight (without cable): 340g
• Detachable 2m premium dual-entry cable with 3.5mm and 1/4" termination
• Impedance: 13 ohms

• DUMMER (Distinctly Un-Magical) cable with an integrated dual 1/4" and 3.5mm plug
• Compact case for travel or storage.