MartinLogan Motion XTW6-LCR | In-Wall Loudspeaker (Single Unit)

Motion XTW6-LCR Expands upon the Smaller XTW6 to Bump Its Performance Level Even Higher

• Latest MartinLogan tech with Folded Motion XT Tweeter, lightweight woven Kevlar cones, Vojtko™ crossover, and dedicated 6.5” midrange driver
• Horizontal or Vertical orientation, tower speaker performance without the large footprint
• Sound incredible in any room regardless of the environment
• Classic MartinLogan styling in Black with White paintable grill

The MartinLogan Sound

MartinLogan Motion XT CI speakers sound incredible in any room. With Controlled Dispersion and one of the most responsive tweeters in the industry, ML's in-wall and in-ceiling models can compete with and often exceed the performance of traditional cabinet speakers.

No matter which Motion XT CI speaker you choose for your room, rest assured they are designed to provide a consistently high level of performance and are easily compatible with other ML speakers for your unique listening space.

Dedicated Midrange

In addition to the FMT XT tweeter and dual 6.5” woven Kevlar Nomex-backed bass drivers, XTW6-LCR, the largest “LCR” model in the Motion XT CI series, includes a dedicated 6.5” midrange driver that brings its acoustic performance to the same level as a traditional floor standing speaker. With a rotating tweeter housing, the XTW6-LCR can be used horizontally when needed, and is the perfect choice for systems desiring a higher level of performance without the large footprint of a tower speaker.

The Sound of Invisibility: Folded Motion® Tweeters

MartinLogan's signature Folded Motion Tweeter utilizes an extremely low-mass diaphragm that "squeezes" air, thus requiring significantly less excursion than the typical 1" dome tweeter. Its folded design allows for a much larger surface area, controlled dispersion characteristics, and vanishingly low distortion. It's a miracle of audio engineering that delivers much of the high-frequency detail, speed and response of a large, dynamic electrostatic panel in a small space. Folded Motion XT tweeters advance thin-film transducer technology even further with a 40% larger radiating surface and 80x30-degree controlled dispersion. This upgrade increases audible bandwidth without sacrificing detail and reduces distortion to an incredibly low level while increasing efficiency and the tweeter's already lightning-fast response time. The result is superior realism and alarming specificity that is aurally astounding, and only by MartinLogan.

Woven Kevlar Cones

All Motion XT CI speakers feature very lightweight woven Kevlar cones specifically engineered to keep pace with the lightning speed of our highest performance XT FMT. While these high-performance drivers offer both increased rigidity and lightness, we took an extra step by adding a special Nomex layer on the back side of the woofer material increasing clarity and realism by reducing resonance and ringing. This layer is not something you can see after installation, but it matters to the performance of the speaker, so it matters to us.

Proprietary Vojtko™ Crossover Networks

Vojtko Crossovers are named after MartinLogan's chief audio technologist, Joe Vojtko. His unique approach to crossover design is just as crucial to MartinLogan's Truth in Sound as are their innovative electrostatic and Folded Motion thin-film driver technologies. A Vojtko Crossover isn't just a set of design requirements - it's a philosophy. Hand-built from the highest quality components, they avoid overly complex topologies and have a straightforward objective: breathtaking realism.

Specifications

MartinLogan Motion XTW6-LCR User Manual

• Full Specifications Sheet
• Frequency Response: 44-25,000Hz ± 3 dB
• Tweeter Dispersion (hor x vert): 80° x 30°
• Recommended Amplifier Power: 50-300W
• Max Power Handling: 150W
• Sensitivity: 93dB @2.83V/ 1 meter
• Impedance: 4Ω, compatible with 8Ω
• High Frequency Driver: FMT Transducer 1.27” x 2.4” Opening | 4.5” x 2.75” Diaphragm
• Crossover Frequency: 260, 2470Hz (3-way)
• Driver Configuration: (x1) 1.27” x 2.75” FMT | (x1) 6.5” Midrange | (x2) 6.5” Woofers
• Woofer: (x2) 6.5” cast aluminum basket | black Kevlar with Nomex backer cone | Open back chamber format | Concave dust cap
• Midrange: (x1) 6.5” cast aluminum basket | black Kevlar with Nomex backer cone | Sealed back chamber format | Concave dust cap
• Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors FMT thermal/current protection
• Cabinet: Black w/ White Paintable Grill
• Connector: Spring-loaded binding posts w/ 4.5mm wire access hole for banana plug, pin, or 12AWG bare wire
• Dimensions (overall size): 28” x 7.69” x 3.67”
• Weight: 18.9 lbs
• Required Wall Opening (includes tolerance): 6.64” x 27”
• Projection From Wall Surface: 0.13”
• Depth Behind Wall Surface: 3.54”
• MartinLogan 5-Year Warranty