FiiO FT1 | Dynamic Closed-Back Headphones
Immerse Yourself in Deep Bass, Dynamic Soundscapes, and Rich Vocals, All Encased in a Stunning Natural Wood Grain Shell with the FiiO FT1
- Crafted with a large 60mm Dynamic driver
- Nanowood Fiber Composite Diaphragm
- Closed-back headphone with "W" shaped suspension gasket
- North American, natural, solid wood Walnut shell
- Oxygen-Free Silver-Plated Copper cables in 3.5mm + 4.4mm terminations
- Check out our FiiO 2025 Buyer's Guide here!
Large Dynamic Driver
The FiiO FT1 features a newly developed second-generation 60mm large dynamic driver, meticulously designed for FiiO's first closed-back headphone. Its larger-than-average driver size enhances energy conversion efficiency and provides a solid foundation for potent bass. Additionally, the increased driver size results in low low-frequency resonance points, allowing for deeper bass, dynamic sound, and an overall authoritative sound.
Nanowood Fiber Composite Diaphragm
The FiiO's diaphragm primarily consists of carefully selected wood fibers, based on 90-year-old spruce wood from Northern Europe. This wood is a top-grade raw material for musical instruments and fiber products, known for its clear sound and natural tone. Spruce wood undergoes a series of processes, including soaking, cooking, and beating, to create specific wood pulp. To meet acoustic toughness requirements, a precise proportion of carbon fiber material is added.
To fully unleash the acoustic performance of the nanowood fibers, light PU material with high internal resistance is utilized for the suspension gasket, improving diaphragm compliance. This process strengthens the density of the vocals from the source of the sound, resulting in warm, lush vocals.
Art of Sound
The FiiO FT1, in alignment with its overall acoustic design and high-level listening experience, employs a nanowood fiber composite diaphragm. It exhibits excellent high-frequency extension and transient response, resulting in clean, precise sound with clear imaging tone, and providing unique, sweet, high-density mid-frequency vocals. This driver works in harmony with the FT1's other acoustic design elements for a specifically-tuned frequency response for a pure and pleasant sonic experience.
Innovative W-Shaped Suspension Gasket
As the first closed-back over-ear headphones from FiiO, FT1 pioneers a new generation of in-house acoustic technology, the W-shaped suspension gasket. The 25mm diameter voice coil is larger compared to similar models and has been specifically tuned. Compared to typical similarly sized diaphragms, the W-shaped diaphragm achieves a 25.8% increase in effective vibrating area, allowing it to store more energy reserves.
The FT1's diaphragm, with a hard dome and compliant suspension gasket, allows the 25mm large diameter voice coil to directly drive the stiffer dome region. This setup minimizes vibration losses between different materials and reduces distortion caused by driver breakup, allowing the FT1 to deliver refined sound.
Japanese CCAW Voice Coil
To ensure robust and high-quality sound, the FiiO FT1 utilizes a specially imported Japanese ultra-fine CCAW (Copper-Clad Aluminum Wire) voice coil with a diameter of up to 25mm. A longer voice coil copper wire can directly enhance transducer efficiency and drive capacity, improving transient response and resulting in purer sound.
Each individual wire core in the CCAW coil has a diameter of approximately 0.035mm, as thin as a hair. Additionally, the voice coil frame employs lightweight Caption, which helps to significantly reduce the overall diaphragm mass. The result is enhanced response speed and minimized reverberation.
Additional Features
Up to -26dB of Sound Isolation
The FT1 incorporates a series of sound insulation components to effectively reduce ambient noise, including external voices and environmental sounds by up to -26 dB. Whether you are commuting, editing recordings, working in an office or gaming, the FT1 allows you to immerse yourself in a high-fidelity audio work.
U-Shaped Sound Damping Tube
The U-shaped sound damping tube enhances passive noise attenuation, but also allows sound energy to pass through a specific length and angle of the flute, increasing air viscosity and reducing cavity resonance frequency. This further enhances bass extension. You'll distinctly feel the air movement and the focused power of drums and strings.
Conical Baffle Plate
FiiO's development team designed a conical baffle plate based on the characteristics of the FT1 dynamic drivers. This device allows the entire driver to be positioned parallel to the human ear, breaking up sound convergence and avoiding standing waves. As a result, there is minimal high-frequency attenuation for true HiFi audio quality.
High-Sensitivity Design
The FT1 features a low impedance design of 32Ω and boast acoustic sensitivity metrics of 113dB/Vrms@1kHz. This significantly reduces the demand for driving power, allowing you to effortlessly enjoy excellent sound quality.
Ergonomic, Lightweight Headband
The 3-axis headband allows for free rotation at multiple angles. This design accommodates various head sizes and ensures a snug fit for enhanced comfort.
High-Quality Silver-Plated Copper Cables
The FT1 comes with two headphone cables terminated in 3.5mm single-ended and 4.4mm balanced plugs. Both cables are made using a silver-plated oxygen-free copper base, with 392 wires and 24AWG thickness.
Specifications
- Type: Closed-Back Dynamic
- Frequency Response: 10Hz-40kHz
- Driver: 60mm Dynamic
- Impedance: 32Ω
- Sensitivity: 113dB/Vrms@1kHz (98dB/mW@1kHz)
- Cable Material: Silver-plated Oxygen-free Copper
- Ear Pad Pressure: 4.5N ± 0.3N
- Weight: 12oz
- Connector: Dual 3.5mmTRS
- Plug: 3.5mm, 4.4mm
- Ear Cup Material: Black Walnut
In the Box
- FT1 Headphones
- Storage bag
- 3.5mm cable
- 4.4mm cable
- 3.5mm to 6.35mm adapter
- Quick Start Guide
