iFi Pro iCAN \ Endgame Tube and Solid State Headphone Amplifier-Bloom Audio
iFi Pro iCAN \ Endgame Tube and Solid State Headphone Amplifier-Bloom Audio
iFi Pro iCAN \ Endgame Tube and Solid State Headphone Amplifier-Bloom Audio
iFi Pro iCAN \ Endgame Tube and Solid State Headphone Amplifier-Bloom Audio
iFi Pro iCAN \ Endgame Tube and Solid State Headphone Amplifier-Bloom Audio

iFi Pro iCAN | Endgame Tube and Solid State Headphone Amplifier

Regular price $1,799.00
1 in stock

Our Take 
This is where we would've inserted Emperor Palpatine's "UNLIMITED POWER" gif, but alas, our site's doesn't support animated gifs (truly tragic). Instead, I guess we just need to say that if you want an endgame headphone amp with moar power than any human being could ever need, you've come to the right place. Oh, and you want both Class A solid state AND tube circuits? Oh, and it needs to be fully balanced with full differential internal signalling? Oh, and have features like XBass analogue bass correction, 3D Holographic dual-analogue matrices, 3 gain stages, and all kinds of headphone port types? I mean, come, dawg...just buy this thing, it's friggin amazing.

From iFi
The iFi Audio Pro iCAN is the flagship studio-grade headphone amplifier and audiophile line-stage processor with individual solid-state and tube amplification sections. The unit utilizes an Alps motorized rotary volume potentiometer, which features "6-tracks" for true balanced volume control regardless of balanced or single-ended connections. The unit features a variety of line-level inputs including two balanced XLRs and three stereo pairs of unbalanced RCAs, while line-level outputs include two balanced XLRs and a stereo pair of RCAs.

The Pro iCAN's front panel offers a selection of headphones, boasting the ability to drive anything from custom in-ear monitors to difficult-to-drive models, such as the AKG K-1000. For balanced headphones, there are no less than four sets including an 1/8" TRRS, two 1/4", two XLR (3-pin), and a single XLR (4-pin). For single-ended headphone outputs, a single 1/8" TRS and 1/4" TRS are provided.

The amplifier audio circuit is a development of iFi's proprietary 'Tube-State' design. It is fully discrete, fully balanced with either tube or J-FET inputs switchable, bipolar second stage and MOSFET-buffered bipolar class-A Power stage (with Class-AB for low-impedance headphones at very high levels). The resulting circuit may be best described as 'tri-brid' where each device is used to greatest sonic advantage while minimizing any drawbacks. Furthermore, the circuit is pure DC coupled to avoid using any conically degrading coupling capacitors.

The Pro iCAN is chocked full of premium components including TDK Japanese-made C0G-type capacitors and Vishay MELF-type thin film resistors. These are complimented by Panasonic Japanese-made ECPU film-capacitors explicitly designed for audio use with extremely low distortion (<0.00001% @ 1V/10 kHz). Additionally, iFi employed ELNA Japanese-made Silmic II capacitors for the power supplies. These use special silk-fiber paper for the isolating barrier resulting in decreased odd-order distortion and reduced microphonic/mechanical resonances.

Headphone Connectors Headphone Outputs

2 x XLR 3-pin
2 x 1/4" / 6.35 mm TRS (iFi SEC balanced system)
1 x XLR 4-pin
1 x 1/8" / 3.5 mm TRRS (with built-in iEMatch, output matched to high-sensitivity headphones)

2 x 1/4" / 6.35 mm TRS (use right jack for unbalanced headphones, however it is possible to drive two separate headphones simultaneously)
1 x 1/8" 3.5 mm TRS (with built-in iEMatch - output matched to high-sensitivity headphones)
Line Inputs and Outputs Inputs
2 x XLR 3-pin (L/R) balanced
6 x RCA (3 stereo pairs) unbalanced

2 x XLR 3-pin (L/R) balanced
2 x RCA (L/R) unbalanced
Additional Connections DC Loop-Out: For use with Pro iCAN add-ons (e.g. electrostatic module)
iFi Electrostatic Add-On Module: Only for connection with the iFi Electrostatic module
DC Power Supply Input: 15 VDC, 4 A
Gain 0, 9, and 18 dB user selectable
Frequency Response 0.5 Hz to 500 kHz (-3 dB)
Total Harmonic Distortion (THD) Total Harmonic Distortion (THD, Balanced/Single-Ended):
Solid-State Balanced: ≤0.0015%
Solid-State Single-Ended: ≤0.005%
Tube Balanced: ≤0.002%
Tube Single-Ended: ≤0.005%
Tube+ Balanced: ≤0.012%
Tube+ Single-Ended: ≤0.2%
Signal to Noise Ratio (SNR) Signal-to-Noise Ratio (SNR, Balanced/Single-Ended):
Balanced: >147 dB(A)
Single-Ended: >137 dB(A)
Output Power Output Power (16 Ohms, Balanced/Single-Ended):
Balanced: >14,000 mW
Single-Ended: >4,800 mW
Output Impedance <1 Ohm
Output Voltage Output Voltage (600 Ohms, Balanced/Single-Ended): Balanced: >23 V Single-Ended: >11.5 V
Input Voltage Pro iCAN: 9 VDC, 6.7 A (18 V/ 3.35 A)
iPower Plus: 85 to 265 VAC, 50/60 Hz
Power Consumption ≤22 W idle, 50 W max
Dimensions (L x W x H) 8.4 x 7.6 x 2.5" / 213.0 x 192.5 x 63.3 mm
Weight 4.3 lb / 1.9 kg

99.9% of orders placed before 5pm EDT go out the same day. We ship USPS and UPS. Transit times range from 1-4 days depending on location (we're in NJ). Signature is required upon delivery. We also offer a variety of expedited shipping options.

Tracking info is provided via email as soon as we ship.

For more info on our policies, including returns and many other FAQs, head here: https://bloomaudio.com/apps/help-center

We're very proud of our reputation for excellent customer service and support. But you probably want to read some unbiased opinions! Check out some of our customer's reviews here: 



We're fanatical about fast shipping. And since we personally stock and ship all orders from our NJ office, you're not gonna get stuck with some lame excuse for a shipping delay. To make your first experience with us extra great, we are happy to ship your first order over $500 via overnight shipping for free. Simply select Free Shipping at checkout with this discount code applied and we will ship USPS Priority Mail Express or UPS Next Day Air Saver depending on rates and best delivery times. Some restrictions apply. If you have any questions or special requests, please chat with us or email us: hello@bloomaudio.com

Click to apply discount code NEWBLOOM automatically at checkout: https://bloomaudio.com/discount/NEWBLOOM 

Please note: the shipping discount won't show until you get to the shipping stage in checkout. Also, unlike our free shipping option, any overnight shipping charges are not refunded in the event that the order is returned (i.e. the actual cost of shipping label will be deducted from the refund). This offer cannot be combined with any other discount codes.

You may also like